Author Topic:

Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

 (Read 19973 times)

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #30 on: 01 August 2014, 06:54:51 AM »

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 072014 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source. (Update time ~9 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 072014 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source.

Fixed an issue that sometimes caused problems updating at 57k baud (so after this update is made subsequent updates should run smoothly at 57k). Preferable to perform this update at 28k to avoid problems. (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 072014 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source.

Fixed an issue that sometimes caused problems updating at 57k baud (so after this update is made subsequent updates should run smoothly at 57k). Preferable to perform this update at 28k to avoid problems. (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #31 on: 03 August 2014, 12:50:21 PM »
Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 072114 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source. (note: bug occurred in 072014 and this update replaces it) (Update time ~9 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 072114 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source.

Fixed an issue that sometimes caused problems updating at 57k baud (so after this update is made subsequent updates should run smoothly at 57k). Preferable to perform this update at 28k to avoid problems. (note: bug occurred in 072014 and this update replaces it) (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 072114 Firmware Update

Release Notes

Small horizontal and vertical chroma improvements.

Added a CUE (chroma upsample error) setting under Input: Video Setup: RES: Picture.

Fixed an issue to handle 720p50 framepacked 3D source.

Fixed an issue that sometimes caused problems updating at 57k baud (so after this update is made subsequent updates should run smoothly at 57k). Preferable to perform this update at 28k to avoid problems. (note: bug occurred in 072014 and this update replaces it) (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #32 on: 13 August 2014, 10:10:17 AM »
Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 072214 Firmware Update

Release Notes

A bugfix for CUE filtering from 072114 firmware when upscaling.

Improved the CUE filter menu, filter did not immediately turn on when enabled (Update time ~9 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 072214 Firmware Update

Release Notes

A bugfix for CUE filtering from 072114 firmware when upscaling.

Improved the CUE filter menu, filter did not immediately turn on when enabled.) (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 072214 Firmware Update

Release Notes

Improved the CUE filter menu, filter did not immediately turn on when enabled. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #33 on: 26 August 2014, 07:38:22 AM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 080114 Firmware Update

Release Notes

Fix for a configuration saving issue that didn't allow the "undo save" to work properly.

Also, another fix for working with the configuration utility.

Note the configuration utility was also just updated to version 1.8. as the earlier version was not downloading the CMS portion of the configuration to save on a PC for 21XX units. If you backed up your 21xx configuration earlier you should back it up again after performing this update and downloading the new 1.8 version of the configuration utility.

There were some improvements to the config utility as well. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #34 on: 29 August 2014, 07:48:04 PM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 081514 Firmware Update

Release Notes

Added 17x17x17 CMS (4.913 Color Points) along with corresponding menu and rs232 command options.

Added option to enable Darbee enhancement for just 2d or just 3d sources.

If you back up your setup to a PC Be sure to download the new configuration (v1.8) utility from the Lumagen Utilities page to use with your Radiance 21xx. (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #35 on: 30 August 2014, 07:56:22 AM »
Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 081514 Firmware Update

Release Notes

Added faster serial port IO to enable faster operation with calibration software. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081514 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #36 on: 01 September 2014, 07:35:11 AM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081614 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~15 minutes @57k)

Download Link
« Last Edit: 01 September 2014, 07:40:00 AM by ConnecTED »
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #37 on: 03 September 2014, 07:36:09 AM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081714 Firmware Update

Release Notes

The audio configuration menu had lost the spdif/coax selectable options from 050114-081614 in 20xx models only. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #38 on: 04 September 2014, 02:33:22 AM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081814 Firmware Update

Release Notes

Location values displayed for 9x9x9 gamut adjustment via the menu were off by 1 for a couple locations due to a rounding error. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #39 on: 08 September 2014, 09:51:52 PM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 082014 Firmware Update

Release Notes

Bugfix for configuring analog composite inputs (2143, 2144 only). The menu would show settings being made for these inputs without corresponding changes to the picture. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #40 on: 13 September 2014, 10:04:30 AM »
LightSpace CMS 6.6.3.1972 (12 September 2014) Closed Beta

Light Illussion has released a Closed Beta Version of LightSpace CMS that supports the Lumagen 21xx uploading of 17-Point Cube 3D LUT Tables.

Because I don't have a Lumagen 21xx here to test it, If any LightSpace user with Lumagen 21xx need to test it, I can provide him the download link via a simple PM.
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #41 on: 20 September 2014, 10:05:19 AM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 091014 Firmware Update

Release Notes

Fix for a bug which under some circumstance could give strange colors in grayscale intermittently. (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #42 on: 23 September 2014, 07:37:58 AM »
Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 091114 Firmware Update

Release Notes

Fix for a bug which under rare circumstances could give strange colors in grayscale that a user may have remedied by turning off and back on. (Update time ~9 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 091114 Firmware Update

Release Notes

Fix for a bug which under rare circumstances could give strange colors in grayscale that a user may have remedied by turning off and back on. (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 091114 Firmware Update

Release Notes

Fix for an issue that changes a 17x17x17 CMS to an 8 point CMS when copying from a CMS location to another. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #43 on: 25 September 2014, 06:18:54 PM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 091214 Firmware Update

Release Notes

Fix for an issue in 091114 having problems with 480/576p reinterlacing giving blank screen or green/pink colors.

Fix for an issue with the test pattern color when editing the color gamut via the menu. (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 362
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #44 on: 09 October 2014, 11:35:49 PM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 100514 Firmware Update

Release Notes

Fix for not being able to power up on an analog input. This update is only helpful for units with analog inputs (2022/2042). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 100514 Firmware Update

Release Notes

Fix for not correctly handling Pal (576i) video on analog inputs and not being able to power up on an analog input. This update is only helpful for units with analog inputs (2124/2144). (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5