Author Topic:

Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

 (Read 19869 times)

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #45 on: 04 November 2014, 08:15:07 PM »

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 103114 Firmware Update

Release Notes

Fix for output setup issue with being unable to select desired Style after being previously set.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 103114 Firmware Update

Release Notes

Fix for output setup issue with being unable to select desired Style after being previously set.

Fix for auto aspect when "Letterbox Zoom" was set to off and would do a zoom step for 2.40 and 1.85 sources.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 103114 Firmware Update

Release Notes

Fix for an issue with optional CRT 3D glasses emitter.

Fix for output setup issue with being unable to select desired Style.

Fix for auto aspect when "Letterbox Zoom" was set to off and would do a zoom step for 2.40 and 1.85 sources.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~15 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #46 on: 05 November 2014, 11:39:57 PM »
Lumagen Radiance 20XX Series (2020,2021, 2022, 2041, 2042) New 110114 Firmware Update

Release Notes

Fixed issue where setting hotplug to always on could result in video not turning on for output. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 110114 Firmware Update

Release Notes

Fixed issue where setting hotplug to always on could result in video not turning on for output. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #47 on: 05 November 2014, 11:44:47 PM »
Lumagen Radiance Configuration utility Version 1.81 for the Radiance XD/XE/XS/Mini/20XX/21XX

This is a PC windows application useful for several tasks:

Backup/restore your setup by downloading/uploading to your PC.

Share your configuration with other users or Lumagen to solve problems.

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #48 on: 30 January 2015, 11:09:18 AM »
Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 012515 Firmware Update

Release Notes

Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 012515 Firmware Update

Release Notes

Adds composite input option to 2022/2042 component inputs. Improvements to auto aspect detection. Added auto aspect detection capability to analog inputs (2022/2042). Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 012515 Firmware Update

Release Notes

Fix for an issue with factory reset after enabling 17x17x17 CMS that would give incorrect colors. Adds composite input option to 2124/2144 component inputs. Improvements to auto aspect detection. Added auto aspect detection capability to analog inputs (2124/2144). Fix for composite input with film mode selected. Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~15 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #49 on: 07 March 2015, 10:37:03 PM »
Lumagen Radiance 20XX Series (2020,2021, 2022, 2041, 2042) New 030115 Firmware Update

Release Notes

Fix for test patterns with 3D signal and 2.35 output.

Fix for 2022/2042 analog component input when source switches from higher resolution  to 480i and the 20XX loses the 480i picture. (Update time ~3 minutes @57k)

Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #50 on: 18 August 2015, 08:38:57 PM »
Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 080415 Firmware Update

Release Notes

Fix for problem with setting vertical shift greater than 0 when using output shrink (a combination sometimes used for setting up a 2.35 output aspect).

Fix for issues with not displaying video source correctly in a rare situation.

Improved reliability of output video connection.

 (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 080415 Firmware Update

Release Notes

Fix for problem with setting vertical shift greater than 0 when using output shrink (a combination sometimes used for setting up a 2.35 output aspect).

Fix for issues with not displaying video source correctly in a rare situation.

Improved reliability of output video connection.

(Update time ~3 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #51 on: 19 January 2016, 09:08:47 PM »
Lumagen Radiance 20XX Series (2020, 2021, 2022, 2041, 2042) New 011216 Firmware Update

Release Notes

Adds rs232 input aspect query command, "ZQI20".

Adds rs232 full information query command, "ZQI21".

Adds rs232 command, "ZY550" to reset automatic aspect detection which is useful if user temporarily overrides it and then wants to re-detect automatically.

Adds "Full" option to reporting mode changes via rs232 in menu under "Other: I/O Setup: RS-232 Setup".

Fixes output aspect per input aspect problem with 2.40 input aspect using the 2.35 output aspect.

Adds improvements to automatic image based input aspect such that detection is more reliable and also will unzoom to display DVD setup menus, etc when they are detected.

If you need documentation on the new rs232 commands before our rs232 tech tip is updated please email us at support@lumagen.com .

 (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 011216 Firmware Update

Release Notes

Adds rs232 input aspect query command, "ZQI20".

Adds rs232 full information query command, "ZQI21".

Adds rs232 command, "ZY550" to reset automatic aspect detection which is useful if user temporarily overrides it and then wants to re-detect automatically.

Adds "Full" option to reporting mode changes via rs232 in menu under "Other: I/O Setup: RS-232 Setup".

Fixes output aspect per input aspect problem with 2.40 input aspect using the 2.35 output aspect.

Adds improvements to automatic image based input aspect such that detection is more reliable and also will unzoom to display DVD setup menus, etc when they are detected.

If you need documentation on the new rs232 commands before our rs232 tech tip is updated please email us at support@lumagen.com .

 (Update time ~15 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #52 on: 20 January 2016, 08:35:05 PM »
Lumagen Radiance 20XX Series (2020, 2021, 2022, 2041, 2042) New 011316 Firmware Update

Release Notes

The newly added ZY550 rs232 command wasn't working too well and was fixed.

The ZQI21 command returned incorrect vres for 4K output modes.

If you aren't using these rs232 commands then you do not need to update. 

 (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 011316 Firmware Update

Release Notes

The newly added ZY550 rs232 command wasn't working too well and was fixed.

The ZQI21 command returned incorrect vres for 4K output modes.

If you aren't using these rs232 commands then you do not need to update. 

 (Update time ~3 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #53 on: 12 October 2016, 09:52:03 PM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 100516 Firmware Update

Release Notes

Small improvements from Radiance Pro auto image aspect detection were added.

(Update time ~3 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5

Offline ConnecTED

  • Calibrated
  • *****
  • Thank You
  • -Gave: 15
  • -Received: 53
  • Posts: 361
  • www.displaycalibrations.com
    • View Profile
    • Ted's LightSpace CMS Calibration Disk
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
« Reply #54 on: 10 March 2017, 11:09:13 AM »
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 030517 Firmware Update

Release Notes

For 21X4 adds PC/Video level setting for composite and s-video sources. Adds audio mute delay for analog video sources.

(Update time ~3 minutes @57k)

 Download Link
Ted's LightSpace CMS Calibration Disk - www.displaycalibrations.com

S/W: LightSpace CMS Full, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL

VP: eeColor 3D LUT Box, DARBEE - PG: DVDO AVLab TPG

Meters: JETI 1211, Klein K-10A, i1PRO2, i1PRO1, SpectraCAL C6, i1D3, C5